Closed-Loop And Open-Loop Control; Control Unit (Display) / Basic Settings - Helios KWL HygroBox Montage- Und Betriebsvorschrift

Operating and installation instructions
KWL Hygrobox KWL HBX EH/WW
®
EN

9. Closed-loop and open-loop control

The unit is delivered with preprogrammed features. After having completed the assembly and after having established all air, water
and electrical connections (see Chapter 13), information on the water hardness must be entered (see commissioning), then the unit is
ready for operation.

9.1. Control unit (display) / basic settings

The KWL HBX 250/KWL HBX 500 air humidification unit comes with a 4.3" touch display. The unit offers easy and intuitive operation
directly on the screen
By briefly touching the display, the standby mode is interrupted and the main overview is shown.
Touching the screen again for approximately five seconds allows for navigation to a submenu in which the basic settings can be car-
ried out. In the submenu, different languages, the display brightness and the display time-out period (=period after which the display
changes to the standby mode again when no action is carried out on the screen) for operation can be selected.
14