Test Mode - Helios KWL HygroBox Montage- Und Betriebsvorschrift

Operating and installation instructions
EN
Note! The air humidification unit is pre-parameterised correctly by the factory. A selection of the unit type (KWL HBX 250 /
KWL HBX 500) and of the type of heater battery (electric / hot water) is only to be carried out when the control panel is
replaced.

9.8. Test mode

In the "Factory test" menu item, the various electrical components can be checked with regard to their operability. For this purpose,
the KWL HBX must first be in the "Off" operating status, then the test mode can be activated.
KWL Hygrobox KWL HBX EH/WW
®
24
The components can be switched active by selec-
tion for a period of max. 10 seconds. By pressing
the button again, operation can be stopped again
immediately.
To exit the test mode, it has to be deactivated
again first.