Emergency Stop - Zipro Jogger Bedienungsanleitung

EN
COMPUTER MANUAL
START/STOP
The device starts 5 seconds after pressing the START/STOP button.
PROGRAMMES
The computer offers 12 automatic programmes saved in the memory, 3 countdown modes (time,
calories, distance), and a fat tissue measuring function (Body Fat).

EMERGENCY STOP

Remove the safety key by pulling the cord. The treadmill stops immediately and sounds a short
alarm. All fields of the display show '---'.
After the key is reconnected, the device is reset.
BUTTONS:
 START/STOP — it is used to start the treadmill in the manual mode or to start a selected
programme.
When the treadmill is running, the button will stop the treadmill when pressed. When it is
pressed, settings are reset as well. After a restart, the device is in the manual mode.
 PROGRAM (P) / MODE (M) – use the button in the treadmill standby mode to choose:
o to start an automatic programme (P1-P12)
o to start time countdown
o to start calorie countdown
o to start distance countdown
 SPEED + / - – it is used to adjust (increase and decrease ) the speed in 0.1 km/h steps.
If you press the button and hold it for more than 2 seconds, the speed will start to
increase/decrease automatically until you release the button.
FUNCTIONS (SPECIFICATION):
TIME
SPEED
DISTANCE
CALORIES
PULSE
31
Total exercise duration, from the start to the end.
Displays the current speed.
Total distance from the start to the end of the exercise.
Total calories burnt from the start to the end of the exercise.
Displays the current heart rate.
00:00-99:59 min
1-16 km/h
0,0-99,9 km
0,0-999 kcal
50-200 BPM