Machine Description - PAVONI ITALIA MINITEMPER Bedienungsanleitung

14 | EN
Minitemper
Cod. MINITEMPER
Thank you for choosing a PAVONI ITALIA machine, a prestigious brand offering guaranteed quality.
Minitemper machine is a small tempering machine, that's perfect for tempering also small quantities of
chocolate while reducing energy consumption. It is really user-friendly thanks to the different available
tempering programs and the possibility to replace the internal basin, that allows the user to easily change
the kind of chocolate to be tempered. This is the ideal value-to-money solution to satisfy the different user's
requirements.
All PAVONI ITALIA machines are designed and built in compliance with the following standards:
• EN 60204-1 machine safety – electrical safety devices;
• EN 12852 machine safety and hygiene for the food industry.
The enclosed conformity declaration 044.03/16, certifies that the CE mark has been applied with reference
to directive:
• Directive 2014/30 EU
• Directive 2014/35 EU
• Directive 2006/42/EU of European Parliament and Council dated May, 17th 2006
• EU Reg. 1935/2004 on food contact material designed to contact food
• EU Reg. 2023/2006 on good manufacturing practice (GMP)
Before leaving the factory, all PAVONI ITALIA S.p.A. products and machines are subjected to rigorous tests
in fulfilment of internal manufacturing quality standards, complying with standard UNI EN ISO 9001.
To guarantee that this machine will continue to provide maximum and lasting satisfaction and reliability,
please follow the operating and maintenance instructions below.
The PAVONI ITALIA customer service is on hand at all times to provide any information or intervention you
may require. Hot-line: +39 035 4934 111

Machine description

Machine body with cover
Power cable
The machine is made up of the following components:
• machine body (01);
• keyboard (02);
• ON/OFF switch/plug unit (right-hand side) (03);
• jogging mode button (04);
• removable cover (05);
• power cable (06-07);
• interchangeable basin (12).
Switching-on
Before switching the machine on, you must make sure that the mains rating (voltage) matches that
indicated on the machine's rating plate (on left-hand side).
Take the power cable and insert the "female" connector (06) in the "ON/OFF switch/plug" unit (03) on the
right of the machine. Insert the "male" plug (07) in a mains socket. Flip the red "ON/OFF switch" on the right
of the machine to position "I". Three horizontal lines will now appear on the keyboard display (02) followed
by the letters: rdy (ready). The display shows three numbers divided by a point after the second one. The third
number (decimal) can only be "0" or "5". For example: 25.0 (integer), 25.5 (decimal).
EN | 15