3. The water is collected in a container underneath the compressor. The water
evaporates in this container
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.
➢ The freezing compartment should be defrosted regularly to ensure proper
operation.
1. Remove the contents from the freezing-compartment and put them into a
cooling box.
2. Place a container in front of the appliance to catch the water.
3. Switch off the appliance by turning the thermostat to position 0/AUS/OFF and
disconnect it from the mains.
4. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning leave the door open for some time to ventilate the appliance.
5.2 Replacing of the illuminant
WARNING! The LED-illuminant
person only. If the LED-illuminant is damaged, please contact a qualified
professional.
6. Trouble shooting
POSSIBLE CAUSE
1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with 3. Check the corresponding socket by
Depending on model
12
F
REEZER
MALFUNCTION
T
HE APPLIANCE DOES NOT WORK AT ALL
:
12
must be replaced by a competent
MEASURE
1. Connect the appliance to the mains
properly.
2. Check the plug.
70
.