Replacing Of The Illuminant; Trouble Shooting; Possible Cause - Pkm SBS 468.4A+NF IX Bedienungsanleitung

D
1. Remove the contents from the freezing-compartment and put them into a cooling
box.
2. Disconnect the appliance from the mains. To disconnect the appliance from the
mains, you must unplug the appliance or use a cut-off device.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Do not use hot water to accelerate the defrosting operation.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning leave the door open for some time to ventilate the appliance.

5.2 Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a
qualified professional (not covered by the guarantee).
NOTICE! This product contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.

6. Trouble shooting

POSSIBLE CAUSE

1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
EFROSTING OF THE FREEZER COMPARTMENT
MALFUNCTION
T
HE APPLIANCE DOES NOT WORK AT ALL
MEASURE
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
59
:
.