Installation Instructions; Unpackaging; Positioning And Levelling - Fagor ADVANCE AG-061 Installations, Bedienungs Und Wartungsanleitungen

EN
Repairs or adjustments carried out by personnel not belonging to FAGOR INDUSTRIAL SAT
(Technical Assistance Service) or an authorised SAT will imply the cancellation of the oven warranty.
The installer of the oven must complete the CHECK LIST, after checking the following:
•
Electrical connection.
•
Gas connection.
•
Combustion gas outlet connection.
•
Hydraulic connection.
•
Waste water connection.
•
Conditions of installation.
•
Explanation of the general working of the oven (use and maintenance).
This appliance must be installed in an adequately ventilated room to prevent the formation of
unacceptable concentrations of substances harmful to health.

3. INSTALLATION INSTRUCTIONS

3.1

UNPACKAGING

Remove packaging from the machine and check for damage during transportation. If any damage is
observed, immediately notify the supplier and the transport company. In the event of doubt, do not
use the machine until the problem has been assessed.
Packaging (plastic, wood, staples, etc.) must not be left in the reach of children, it
is a potential hazard.
The machine should be moved using a fork-lift truck or similar to avoid damage to the structure.
Transport the machine to the installation location and then remove packaging.
All the packaging can be recycled. Dispose of packaging correctly.
3.2

POSITIONING AND LEVELLING

This machine has adjustable legs to ensure that it is always correctly mounted. Just rotate the legs
until the required height. The flooring on which the machine is to be installed must be able to bear
the full weight of the machine.
For optimum operation, it is essential that the appliances are correctly levelled.
It is advisable to install an extraction hood for the optimum operation of the appliance.
Place the appliance in a sufficiently ventilated room, in accordance with the current regulations, to
prevent the formation of unacceptable concentrations of harmful substances in the installation site.
The positioning and installation, and all repairs or modifications, should always
be carried out by an AUTHORISED TECHNICIAN, in accordance with the
applicable legislation of the country.
The installation, incorrect adjustment, inappropriate maintenance or use of the
appliance may cause material damages and injuries.
70