Product Liability - Husqvarna BMG 780 Bedienungsanweisung

• "RDY" (ready): the product can be used.
• "STO" (safety stop): the product has no input on
the STO contact.
• "ACC" (acceleration): the grinding disc speed
increases to the set value.
• "DEC" (deceleration): the grinding disc speed
decreases to the set value or until the product
stops.
• "NST" (freewheel stop): the movement of the
product stops.
2. Command channel
• "Term": motor is stopped.
• "HMI": motor is started.
3. Main voltage for the grinding motor
4. Electrical current for the grinding motor
5. Grinding disc speed
6. Button to increase grinding discs speed
7. Home button
8. Info button
9. Start button
10. Speed adjustment for grinding discs
11. Stop button
12. Button for direction of rotation of the grinding discs
13. Button to open the menu system
14. Button to decrease grinding discs speed
Symbols on the product
Warning: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
High voltage.
Lifting point on the product.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use an approved respiratory protection.
Use approved hearing protection.
6
Use approved eye protection.
Use approved protective gloves.
Use approved protective boots.
This product is in compliance with
applicable EU directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Type plate
1 2
13
12
11
10
1. Product number
2. Product weight
3. Rated power
4. Rated voltage
5. Enclosure
6. Rated current
7. Frequency
8. Maximum slope angle
9. Manufacturer
10. Scannable code
11. Production year
12. Model
13. Serial number

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
3 4
5
6
7
8
9
1811 - 001 - 02.05.2022