Husqvarna BMG 780 Bedienungsanweisung Seite 19

Main menu Description
"Password" To unlock the keypad.
The up and down arrow on the keypad (C) let you to
move up and down the menu lists. The OK button (B)
makes the selection. The back arrow on the keypad (C)
lets you go back in the menu system.
Note:
The display texts in this manual are in English.
The display texts on your product are in the selected
To change the language for the
language. Refer to
display texts on page 19 .
To do a check of operation time
1. Select "DRI" in the main menu.
2. Select "Display".
3. Select "Power-On time" and do one of the
procedures that follow.
a) Select "APH" to show energy consumption.
b) Select "Motor Run Time" to show the time that
the motor has been switched on.
c) Select "Power-on time" to show the time that the
product has been switched on.
d) Select "Time Counter Reset" to reset 1 of the 3
above values.
To do a check of error history
1. Select "DRI" in the main menu.
2. Select "Display".
3. Select "DGT".
4. Select "Error history". The last 10 errors are shown.
5. Select 1 of the errors for more information such as
operation mode, motor current and DC bus voltage.
To change the language for the display texts
1. Select "Interface" in the main menu.
2. Select "language" and select the language for the
display texts.
Weights BMG 780 RC
The product has 1 weight on each side of the product.
If the product is heavy to operate, adjust the weights
to change the pressure on the grinding head. Refer to
Technical data BMG 780 RC on page 29 . The weights
must be adjusted to the same position on the right and
on the left side. The weights have 3 positions:
• Position 1: High pressure on the grinding head. This
position increases the operation effect. This position
1811 - 001 - 02.05.2022
is also used when you set the product in transport
position.
• Position 2: Moderate pressure on the grinding head.
• Position 3: Low pressure on the grinding head. This
position is also used when you tilt the product to
servicing position.
To adjust the weights BMG 780 RC
WARNING:
the weights. The moving parts can cause
injury.
WARNING:
weight lock locks correctly when the weights
are put in the selected position.
Be careful when you adjust
Always make sure that the
19