Symbols On The Product; Rating Plate; Product Liability; Symbols On The Control Panel - Husqvarna PG 540 Bedienungsanweisung

Symbols on the product

WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use hearing protection, eye protection
and respiratory protection. Refer to
Personal protective equipment on page
6 .
The dust can cause health problems.
Use an approved respiratory protection.
Always make sure that there is good
airflow.
Always lift the product at the lifting eye.
Use the holes for tie-down straps to attach
the product to a transport vehicle.
The product is not domestic waste.
Recycle it at an approved disposal
location for electrical and electronic
equipment.
This product is in compliance with
applicable EC directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.

Symbols on the control panel

Emergency stop.
Product on and reset the product.
Grinding head on.
Speed and direction of rotation, grinding
disc.
4

Rating plate

1
10
11
12
13
1. Product number
2. Product weight
3. Rated power
4. Rated voltage
5. Rated current
6. Frequency
7. Enclosure
8. Maximum slope angle
9. Manufacturer/Importer
10. Serial number
11. Model
12. Production year
13. Scannable code

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Husqvarna Fleet Services
Husqvarna Fleet Services
gives the operator an overview of all products that
are connected. On this product a Husqvarna Fleet
™
Services sensor can be installed. The Husqvarna Fleet
™
Services sensor collects product data and lets you
connect to the Husqvarna Fleet Services
Husqvarna Fleet Services
as operation time, servicing intervals and location of the
product.
For more information about Husqvarna Fleet Services
download the Husqvarna Fleet Services
to your Husqvarna representative.
2 3 4 5 6
™
™
is a cloud solution that
™
system. The
™
system reports data such
™
app or speak
1211 - 004 - 09.12.2022
7
8
9
™
,