Herunterladen Inhalt Inhalt Diese Seite drucken

Husqvarna BMG 780 Bedienungsanweisung Seite 17

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

9. Turn the "SPEED" control for grinding motor (D) to
adjust the grinding motor speed.
10. Move the joystick (F) to steer the product. The more
the joystick is pushed into selected position, the
faster the product moves.
a) Move the joystick maximum to the right or left to
turn the product around its axle.
b) Move the joystick to the left or to the right top
corner to make the product turn around 1 wheel.
11. Push the "STOP" button (G) to stop the grinding
operation.
12. Push the ON/OFF button (A) to stop the remote
control.
CAUTION:
To move the joystick with force does not
make the performance of the product better.
The joystick can become damaged if you
operate it with too much force.
CAUTION:
by the joystick.
Note:
On abrasive surfaces, it can be necessary to
push the joystick forward to release the surface friction
of the diamond tools.
To operate the product with the remote
control, cruise control BMG 780 RC
WARNING:
see the product at all times when you
operate it with the remote control. The
operation range of the remote control makes
it possible to move the product also when
you cannot see it. Risk of injury and
damage.
1811 - 001 - 02.05.2022
F
Move the joystick carefully.
Do not lift the remote control
Make sure that you can
CAUTION:
time while the grinding head is on. If you
do not move the product, the surface can
become rough.
1. Start the product. Refer to
780 RC on page 15 .
2. Turn the switch for remote control operation to
"LOC".
LOC / ACC
G
3. Do a pairing operation of the remote control. Refer to
To do a pairing operation BMG 780 RC on page 15 .
4. Attach the belt with remote control around your
waist.
5. Push the ON/OFF button (A) to start the remote
control.
C
E
6. Push the reset/connection button (B) for 2 seconds
and push the left/right grinding motor switch (C) up
and down.
7. Turn the "SPEED" control for grinding motor (D)
counterclockwise to decrease the grinding motor
speed to minimum.
8. Push "START" button (E) to start the grinding
operation.
Move the product all the
To start the product BMG
REMOTE
C
H
A
A
T
P
HOURS
A
D
B
17

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bmg 780 rc

Inhaltsverzeichnis