Floor Nozzle - Kärcher SC 4 Deluxe EasyFix Originalbetriebsanleitung

● For wiping damp dust: Steam a cloth
briefly and use it to wipe over the furni-
ture.
Spotlight nozzle
The spotlight nozzle is suitable for cleaning
areas, joins, fittings, drains, sinks, WCs,
blinds or radiators that are difficult to ac-
cess. The closer the spotlight nozzle is to
the soiled area, the greater the cleaning ef-
ficiency will be as the temperature and
steam volume are at their highest at the
nozzle opening. Larger lime deposits can
be treated before steam cleaning with a
suitable detergent. Allow the detergent to
soak in for approx. 5 minutes and then
steam it off.
1. Slide the spotlight nozzle onto the steam
gun.
Illustration F
Round brush (small)
The small round brush is used for cleaning
stubborn dirt. Stubborn dirt can be removed
more easily by brushing.
ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces.
It is not suitable for cleaning sensitive sur-
faces.
1. Fit the round brush to the spotlight noz-
zle.
Illustration G
Round brush (large)
The large round brush is suitable for clean-
ing large rounded surfaces, e.g. wash ba-
sin, shower tray, bath tub, kitchen sink, etc.
ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces.
It is not suitable for cleaning sensitive sur-
faces.
1. Fit the large round brush to the spotlight
nozzle.
Illustration G
Power nozzle
The power nozzle is used for cleaning stub-
born dirt and for blowing down corners, on
joints, etc.
18
1. Install the power nozzle onto the spot-
light nozzle according to the round
brush.
Illustration G
1. The crevice brush is used for cleaning
narrow gaps e.g. window recess and
cranks in the walls.
Illustration G
Manual nozzle
The manual nozzle is used for cleaning
small areas that can be washed down,
shower cubicles and mirrors.
1. Push the manual nozzle onto the steam
gun according to the spotlight nozzle.
Illustration F
2. Pull the cover over the manual nozzle.
The floor nozzle is used for cleaning wash-
able wall and floor coverings e.g. stone
floors, tiles and PVC floors.
ATTENTION
Damage due to build-up of steam
Heat and moisture can lead to damage.
Check the heat resistance and steam effect
on an inconspicuous area using a minimal
volume of steam prior to use.
Note
Detergent residue or care emulsions on the
surface to be cleaned can lead to streaks
during steam cleaning, which will disappear
however once these have been used sev-
eral times.
We recommend sweeping the floor or vac-
uum cleaning it before using the device. In
this way the floor will be cleared of dirt and
loose particles before the wet cleaning
commences. Work slowly on surfaces that
are heavily soiled so that the steam has
longer to take effect.
1. Connect the extension tubes with the
steam gun.
Illustration H
2. Push the floor nozzle onto the extension
tube.
Illustration I
3. Fasten the floor cleaning cloth to the

floor nozzle.

English
Crevice brush
Floor nozzle