Installation; Operation - Kärcher SC 4 Deluxe EasyFix Originalbetriebsanleitung

Main connection cable with main plug
6
Display - OFF position
7
Min. steam stage
8
Med. steam stage
9
Max. steam stage
10
Safety lock
11
Park bracket for floor nozzle
12
Steering roller
13
Steam gun
14
Steam lever
15
Unlocking button
16
Child lock
17
Steam hose
18
Spotlight nozzle
19
Round brush (small)
20
**Round brush (large)
21
**Power nozzle
22
Crevice brush
23
Manual nozzle
24
Manual nozzle microfibre cover
25
Extension tubes (2 x)
26
Unlocking button
27
Floor nozzle
28
Hook and loop fastener
29
Microfibre floor cloth (1 x)
30
**Microfibre floor cloth (2 x)
31
**Carpet glider
32
**SC 4 Deluxe EasyFix Premium

Installation

Installing accessories
1. Push the open end of the accessory on-
to the steam gun so that the unlocking
button on the steam gun engages.
Illustration F
2. Push the open end of the accessory on-
to the spotlight nozzle.
Illustration G
3. Connect the extension tubes with the
steam gun.
a Push the 1st extension tube onto the
steam gun so that the unlocking but-
ton on the steam gun engages.
The connection pipe is connected.
b Push the 2nd extension tube onto the
1st extension tube.
The connection pipes are connected.
Illustration H
4. Push the accessory and / or the floor
nozzle onto the free end of the extension
tube.
Illustration I
The accessory is connected.
Disconnecting accessories
1. Move the child lock back.
The steam lever is locked.
2. Press the unlocking button and pull the
parts apart.
Illustration N
The water reservoir can be removed at any
time for filling or be filled directly at the de-
vice.
ATTENTION
Damage to the device
Unsuitable water can block the nozzles or
damage the water level indicator.
Do not fill in pure distilled water. Use a max-
imum of 50% distilled water mixed with tap
water.
Do not use condensation from the clothes
dryer for filling.
Do not use collected rain water for filling.
Do not use cleaning agents or other addi-
tives (e.g. scents) for filling.
Removing the water reservoir for filling
1. Pull the water reservoir vertically up-
wards.
Illustration B
2. Fill the water tank vertically with tap wa-
ter or a mixture of tap water and no more
than 50% distilled water.
3. Insert the water reservoir and press
downwards until it locks into place.
Filling the water reservoir directly on the
1. Fill tap water or a mixture of tap water
and no more than 50% distilled water
from a vessel into the filling hole of the
water reservoir.
Illustration C
English

Operation

Filling water
device
15