How To Use The Accessories En; Floor Nozzle - Kärcher DE 4002 Bedienungsanleitung

Removing the Accessories
Warning
Hot water may drip out of the accessory
parts while you are detaching them! Never
detach accessory parts while steam
streams out - risk of scalding!
Turning Off the Appliance
 Switch the appliance off at the switches.
 Lift the cover of the appliance connector
and disconnect the steam plug from the
appliance.
 Disconnect the mains plug from the socket.
Note
You can leave the residual water in the ap-
pliance.
How to Use the Accessories
Steam gun
Application examples for use of the steam
gun without accessories:
to remove odours and wrinkles from
–
hanging clothes by steaming them at a
distance of 10 to 20 cm.
to remove dust from plants. Here, keep
–
a distance of 20-40 cm.
for moist dusting, by briefly steaming
–
the cloth and wiping the furniture with it.
Detail nozzle
The closer you hold the nozzle to the
–
dirty spot, the higher the cleaning effect
as temperature and pressure of the
steam reach their maximum values im-
mediately when they are emitted from
the nozzle.
The detail nozzle with the different at-
–
tachment is suited for cleaning difficult
to access points, such as corners,
grooves, etc. as well as blinds, central
heaters, toilets, stainless steel, mirrors,
mirrors, fixtures, coated and enameled
surfaces, loosening of stains.
The power nozzle increases the emis-
–
sion speed of the steam. Therefore, it is
well-suited for cleaning very tough dirt,
blowing out corners, grooves, etc.
18
Note
The round brush is not suited for the clean-
ing of delicate surfaces.
Suited for all washable wall and floor
–
coverings, e.g. stone floors, tiles and
PVC floors. Work slowly on very dirty
surfaces to allow the steam to act on the
dirt for a longer period of time.
Flip and replace floor cloth regularly to
–
improve the dirt pickup.
Note
Detergent residue or care emulsions that
are still present on the surfaces to be
cleaned, can lead to smears when steam
cleaned. However, these will disappear
with repeated cleaning procedures.
 Attach the floor cloth to the floor nozzle.
1 Fold the floor cloth the long way and
place the floor nozzle on top of it.
2 Open holding clamps.
3 Place the cloth ends into the openings.
4 Close the holding clamps.
Warning
Do not insert fingers between the clamps.
Suited for small washable areas, shower
stalls, mirrors or furniture cloth material.
 Pull the terry cloth cover over the man-
ual nozzle.
Order no. 6.959-262.0
 Connect the steam plug of the iron to
the appliance.
Steam ironing
 VAPOHYDRO regulation with rotary
knob, turn all the way to "-".
 Set the temperature controller at least
to 3 for ironing all types of fabrics. The
emitted steam prevents the fabric from
becoming overheated.
Once the indicator lamp on the iron has
gone out, the system is ready for use.
– 6
EN

Floor nozzle

Hand nozzle
Iron (option)