Device Description; Installation; Installing Accessories - Kärcher SC 5 EasyFix Premium Plus Bedienungsanleitung

Device description

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, refer to the graphics page.
Illustration A
Device socket with cover
1
Water reservoir
2
Carrying handle for the water reservoir
3
Selector switch
4
Control panel
5
Display - OFF position
6
Display - water shortage (red)
7
Display - heating (green)
8
Steam stage 1
9
Steam stage 2
10
Steam stage 3
11
Steam stage 4
12
VapoHydro function steam stage
13
Display - iron detection
14
Display - steam gun detection
15
Cap for accessory compartment
16
Maintenance lock
17
Carrying handle
18
Holder for accessories
19
Accessory storage compartment
20
Mains connection cable storage compartment
21
Park bracket for floor nozzle
22
Mains connection cable with mains plug
23
Non-driven wheels (2 x)
24
Steering roller
25
Steam gun
26
Steam lever
27
Unlocking button
28
Child lock
29
Steam hose
30
Steam connector
31
Spotlight nozzle
32
Round brush (small, black)
33
** Round brush (small, yellow)
34
Power nozzle
35
Round brush (large)
36
Manual nozzle
37
Microfibre cover for manual nozzle
38
** Microfibre abrasive cloth for manual nozzle
39
Extension tubes (2 x)
40
Unlocking button
41
Floor nozzle
42
Hook and loop fastener
43
Microfibre floor cloth (2 x)
44
Carpet glider
45
Descaler
46
** Steam pressure iron
47
Steam switch (bottom)
48
Indicator light (orange) - heating
49
Steam switch (top)
50
Lock for steam switch
51
Temperature controller
52
Steam connector
53
** optional

Installing accessories

1. Open the cover on the device socket.
Illustration B
2. Connect the steam connector to the device socket
so that the steam connector audibly engages.
Illustration B
3. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration H
4. Push the open end of the accessory onto the spot-
light nozzle.
Illustration I
5. Connect the extension tubes with the steam gun.
a Push the first extension tube onto the steam gun
so that the unlocking button on the steam gun en-
gages.
The connection pipe is connected.
b Push the second extension tube onto the
first extension tube.
The connection pipes are connected.
Illustration J
6. Push the accessory and / or the floor nozzle onto the
free end of the extension tube.
Illustration K
The accessory is connected.
Disconnecting accessories
1. Set the child lock to the rear.
The steam lever is locked.
2. Push the cover on the device socket down and dis-
connect the steam connector from the device sock-
et.
3. Push the unlocking button and pull the parts apart.
Illustration P
English

Installation

13