Operating The Kvm Extender Exclusively - G&D VisionXS-C-DP-UHR Installation Und Bedienung

Operation

Operating the KVM extender exclusively

IMPORTANT:
The activation of the
a second user module are prerequisites for this operation option.
Activate the right for permanent access to operate the KVM extender exclusively
with one console.
If this function is activated, the extender's exclusive operation can be activated by
pressing the hotkey
Immediately after pressing this hotkey, the input devices of the concurrent console
are deactivated. By pressing the hotkey again at the active console, users at both
consoles are again able to operate the KVM extender.
NOTE: After the exclusive operation of the KVM extender has been activated at
one console, the Caps Lock, Num as well as the Scroll Lock LEDs are blinking alter-
nately at the keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates the exclusive opera-
tion of the KVM extender.
ADVICE:
In the standard configuration of the KVM extender, the computer's
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the user modules (see page 34) to switch
off the image of the concurrent console while you operate the extender at the
other console.
 Right for exclusive access to the console on page 32
 Changing the video mode of consoles on page 34
 Changing the exclusive mode aktionkey on page 29
17 · G&D VisionXS-C-DP-UHR
Transm. Redundancy feature
Hotkey+Print (default: Ctrl + Print ).
and the connection to