Resetting The Netfilter Rules - G&D VisionXS-C-DP-UHR Installation Und Bedienung

Configuration

Resetting the netfilter rules

In the default settings, all network computers can access the system's IP address
(open system access).
With the Config Panel
access. After a netfilter rule has been created, the open system access is deactivated
and all incoming data packets are compared to the netfilter rules.
The created netfilter rules can also be deleted with this function.
NOTE: This function can be carried out only via on-screen display.
How to delete the created netfilter rules:
1. Open the remote OSD of the computer module by pressing
(default: Ctrl
Open the local OSD of the user module by pressing the
Alt + Num ) if you want to reset the local settings of the user module.
2. Select the row
3. Select the row
4. Confirm the security prompt or cancel the process.
53 · G&D VisionXS-C-DP-UHR
web application, you can create netfilter rules to control the
+ Num ) if you want to reset the settings of the extender system.
and press
Network
Reset netfilter configuration
.
Enter
and press Enter
remote hotkey
local hotkey (default:
.