PeakTech 1280 Bedienungsanleitung Seite 58

Ports Instruction (P 1290)
1.
1. USB port: Supply power by PC USB or the adapter; communicate with PC
2. Probe Compensation: Measurement signal (5V/1KHz) output
3. MULTI port: EXT trigger input, trigger output or Pass/Fail output
4. Signal input of Channel 2
5. Signal input of Channel 1
4. How to Connect with PC
1. Install the Software
Install the software on the supplied CD (The setup file is named as PeakTech VO-***-setup.exe, ***
represents version number such as 1.022).
2. Double-click the created desktop shortcuts (PeakTech_VO).
3. Connection
Use the supplied USB cable to connect the USB port of the Oscilloscope in Figure 0-1 to the
USB port of a PC.
Note: If you use a USB cable which is not supplied by us, some problems such as connection error
and signal disturbing might occur.
4. Install the USB driver:
Open the help document of the software. Follow the steps of title "USB Driver Install Guide" in the
document to install the driver.
-57-
2.
3.
4.
5.