PeakTech 1280 Bedienungsanleitung Seite 100

Click "Connect"
(4)
22. Technical Specifications
Unless otherwise specified, the technical specifications applied are for this oscilloscope only, and
Probes attenuation set as 10X. Only if the oscilloscope fulfills the following two conditions at first,
these specification standards can be reached.
This instrument should run for at least 30 minutes continuously under the specified operating
temperature.
If change of the operating temperature is up to or exceeds 5°C, do the "SelfCal" procedure in Utility
menu (see Self Cal).
Performance Characteristics
Bandbreite
Channel
Acquisition Mode
Sample rate
(real time)
Instruction
P 1280
P 1285
P 1290
2 + 1 (* External)
Normal, Peak detect, Averaging
P 1280
P 1285
P 1290
-99-
60 MHz
100 MHz
25 MHz
Dual CH 250 MSa/s
Single CH 500 MSa/s
Dual CH 500 MSa/s
Single CH 1 GSa/s
Dual CH 100 MSa/s
Single CH 100 MSa/s