Transport - STIEBEL ELTRON LWZ 180 Bedienung Und Installation

INSTALLATIoN
Preparation
Minimum clearances
If you wish to install the silencer attachment, which is available
as an accessory, observe the minimum clearances it requires.
≥300
Installation drawing with silencer attachment
46 | LWZ 180 | LWZ 280 | LWZ 180 Enthalpie | LWZ 280 Enthalpie
≥300
379
147
≥400
9.3

Transport

Material losses
!
If possible, transport the appliance to the installation lo-
cation in its original packaging.
If the appliance is transported without packaging and
without using a pallet, e.g. to carry it up or down stairs,
its outer casing may be damaged.
To transport the appliance without packaging, first re-
move the front panel of the appliance. See chapter "In-
stallation / Removing the front panel".
Material losses
!
Never use the air connections as handles for carrying
the appliance.
≥400
www.stiebel-eltron.com