How To Format, Integrate And Use Programs From Other Sources - TB-ELECTRONICS F-SCAN3 NT Bedienungsanleitung

How to format, integrate and use programs from other sources

A touch on the button ABC opens the menu to reach and operate frequency programs generated outside the
F-SCAN3 NT. Up to 460 sets, of up to 30 frequencies each, can be transferred to the "ABC" memory block
using either the software F-SCANT3, or a common terminal program.
As a factory setting the "ABC" function is locked. A release code can be acquired by email from the factory or
from an F-SCAN sales point.
The frequency programs must be written with a text editor in the following format:
(PROGRAMM 1)10,100,1000,10000;
(PROGRAMM 2)20,30,40,50,60,100;
The program name (maximum of 20 characters – letters of the alphabet only) must be set in parenthesis. It is
followed by 1 to 30 frequency values, separated by comma. The end of the sequence has to be marked by a
semicolon " ; ".
A carriage-return-line-feed = 13-10 must separate the program lines.
As soon as the list of frequency programs is generated and transferred to the F-SCAN3 NT, it can be
accessed on the unlocked menu "ABC".
Fewer properties than in the menu "123" can be assigned to individual frequency values here. A change of the
timer will be valid for all frequencies stored in the memory block of 460 programs. The amplitude of square
signals can be adjusted up or down with the amplitude slider.
A touch on program or name opens the screen with 20 program lines. A touch on any line opens the program
for use. Missing positions can be reached with touches on the up and down arrows of the scroll bar moving
always a full page.
Any program can be copied from the "ABC" memory block of 460 programs to the "123" memory block of 100
programs with a touch on the button SAVE. The routine requests the input of the position number to copy to.
Once saved in the "123" routine the program name can be edited and all property assignments to frequencies
offered there are applicable.
The altered program can thus be transferred to other F-SCAN models with the help of the ChipCard.
- 24 -