TB-ELECTRONICS F-SCAN3 NT Bedienungsanleitung Seite 22

LOOP
AUTO OFF
PROTECT
Battery history indication
A blue field with green vertical lines is displayed on the top of the screen. If the color of the lines turn into
yellow or red, the battery charge is poor and it is recommended to use the charger for recharge of the battery.
The distance between two vertical gray lines indicate a slot of one hour.
A fully charged battery should be good for 3.5 to 5.5 hours of independent operation.
The charge time for a fully discharged battery is approx. 6 hours.
LOOP ON or OFF. If enabled a program which has been started from „123" or
„ABC" will loop forever. The only way to Stop it is with STOP icon.
If the text "OFF" is visible inside this button, the AUTO POWER OFF function is
disabled. When touching the button, the number of minutes after which the
device switches off automatically, will increase in one minute steps. The
automatic power off function will be restarted if the device is operated or a
program is running or the device is under software control. The remaining time is
being displayed in seconds on left/bottom of the screen.
Button to avoid accidental modification of frequencies in protocols. When
activated (green), it is not possible to modify frequency values in programs or
protocols.
- 22 -