The Menu Settings - TB-ELECTRONICS F-SCAN3 NT Bedienungsanleitung

The menu SETTINGS

A touch on the SETUP button opens a menu for global settings. All settings will be memorized in a nonvolatile
memory of the device.
BRIGHTNESS
LANGUAGE
EAP SENSE
SOUND
AUTO-R
GLOBAL TIMER
GLOBAL WOBBLE
GLOBAL ENVELOPE
POWER SAVE
set this slider to the desired backlight
a touch on the flag switches to the next language which is pre-installed into the
device. Languages are English, German, Czech, Polish, Hungarian and Swedish.
For some languages, some words only are being indicated in the selected
language. For some languages, also the ABC list entries are translated.
set this slider to the desired sensitivity which is most used to. The standard
setting is 20/6. The value of 20/1 is highest sensitivity, 20/20 is lowest sensitivity.
set this slider to the volume of sounds
A touch on the icon switches this unique function ON or OFF. When switched
OFF, the amplitude of SQUARE wave signals and SINE wave signals will be for
all frequencies of a program as assigned during the setup.
When switched ON, the microcontroller calculates the signal strength of
SQUARE waves on the base of each frequency value following a physiological
algorithm. The results override the original amplitude settings.
If AUTO-R is enabled, OSCA is automatically set to OFF.
A touch on the icon switches GLOBAL TIMER ON or OFF. When switched OFF,
the timer settings in the "123" menu may be set individually for each frequency.
When switched ON, the timer settings in the "123" menu is for all 50 frequencies
of the program the same. The global timer becomes active, when the timer
setting in the "123" menu is modified.
GLOBAL WOBBLE ON or OFF. If enabled the wobble settings will be incurred for
all frequencies of a program.
If GLOBAL ENVELOPE is activated, and the signal form is SQUARE or SINE,
the amplitude will oscillate slowly between 0 and the value assigned to the
frequency. The background color of the button changes to green when activated.
If enabled, the backlight turns to lowest possible setting after 30 seconds. Any
touch on the screen sets the backlight to its preset value. The power save
function saves battery charge during an application so that it is possible to
ensure a longer run time.
- 21 -