Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dress properly. Do not wear loose
f)
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts .
If devices are provided for the
g)
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use
of dust collection can reduce dust‑related
hazards .
Do not let familiarity gained from
h)
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second .
Power tool use and care
Do not force the power tool. Use
a)
the correct power tool for your
application. The correct power tool will do
the job better and safer at the rate for which it
was designed .
Do not use the power tool if the
b)
switch does not turn it on and off. Any
power tool that cannot be controlled with the
switch is dangerous and must be repaired .
Disconnect the plug from the power
c)
source and/or the battery pack, if
detachable, from the power tool
before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally .
26
GB/IE
Store idle power tools out of the
d)
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dangerous
in the hands of untrained users .
Maintain power tools and
e)
accessories. Check for misalignment
or binding of moving parts,
breakage of parts and any other
condition that may affect the power
tool's operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools .
Keep cutting tools sharp and clean.
f)
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control .
Use the power tool, accessories and
g)
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation .
Keep handles and grasping surfaces
h)
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling and
control of the tool in unexpected situations .
Werbung
Inhaltsverzeichnis
