Vibration And Noise Reduction; Behaviour In Emergency Situations - Parkside PAS 4 D6 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Secure the workpiece. A workpiece
b)
securely held by a clamping device or vice is
much safer than one held in your hand .
Hold the power tool firmly. High
c)
reaction moments can occur for brief periods
while lightening and loosening screws .
Switch the power off immediately
d)
if the tool blocks while in use. Be
prepared for high reaction moments as these
can cause kickback .
While working on the appliance,
e)
transporting it or storing it, always
set the rotation direction switch to
the central position (lock position).
This prevents the power tool from starting up
unintentionally .
˜ Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use low‑
vibration and low‑noise operating modes as well as
wear personal protective equipment .
Take the following points into account to minimise
the vibration and noise exposure risks:
Only use the product as intended by its design
and these instructions .
Ensure that the product is in good condition
and well maintained .
Use correct accessory tools for the product and
ensure they are in good condition .
Keep tight grip on the handles / grip surface .
28 GB/IE
Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate) .
Plan your work schedule to spread any high
vibration tool use across a longer period of
time .
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this product by
means of this instruction manual . Memorise the
safety warnings and follow them to the letter . This
will help to prevent risks and hazards .
Always be alert when using this product, so
that you can recognise and handle risks early .
Fast intervention can prevent serious injury and
damage to property .
Switch the product off and disconnect it from
the mains if there are malfunctions .
Have the product checked by a qualified
professional and repaired, if necessary, before
you operate it again .