Package Contents; Electrical Safety - DeWalt DC300 Originalanweisungen

E N G L I S H
Do not incinerate the battery pack
Charge only with dedicated D
chargers

Package contents

The package contains:
1 Cordless circular saw
1 Saw blade (DT1211)
1 Allen key
1 Battery pack (DC300K/DC310K)
2 Battery packs (DC300KL/DC310KL)
1 Charger
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not
included with N-models.
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
1 On/off switch
2 Lock-off button
3 Front handle
4 Spindle lock
5 Dust spout
6 Saw shoe
7 Lower guard retracting lever
8 Lower guard
9 Saw blade
10 Bevel adjustment lever
11 Kerf indicator
12 Depth adjustment lever
13 Battery pack
14 Release button
15 Charger
16 Charging indicators (red)
40
INTENDED USE
The DC300/310 heavy-duty circular saws are
designed for professional sawing applications at
various work sites (i.e., construction sites).
WALT
E
DO NOT use under wet conditions or in presence
of fl ammable liquids or gases.
These heavy-duty circular saws are professional
power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D
insulated in accordance with EN 60335.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the
plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made
to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data). The minimum conductor size
2
is 1 mm ; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
WALT charger is double
E