Package Contents; Description (Fig. A); Assembly And Adjustment - DeWalt DE6661 Bedienungsanleitung

Safety instructions
Observe the safety regulations in the instruction
manual of the Power Tool to be connected to
this attachment. Also observe any applicable
additional safety rules. Read the following safety
instructions before attempting to operate this
product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
4 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
6 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
Warning! The use of any accessory or
attachment or performance of any operation with
this tool, other than those recommended in this
instruction manual may present a risk of personal
injury.
8 Have your Power Tool Attachment repaired
by an authorized D
Repair of your Power Tool Attachment being a
matter of precision and skill, always take it to
your D WALT Authorized Repair Agent.
E
9
WALT repair agent
E

Package contents

The package contains:
1 Planer stand
1 Blade guard
1 Wing nut
1 Washer
1 Screw
1 Rubber pad for DW676
3 Locking wedges
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

The planer stand DE6661 allows stationary use of
your DW676, DW678(E) or Elu MFF81 planer.
1 Blade guard
2 Wing nut
3 Washer
4 Screw
5 Bolt
6 Washer
7 Wing nut
8 Locking wedge for DW678, DW678E
9 Locking wedge for DW676
10 Locking wedge for MFF81
11 Rubber pad for MFF81, DW678, HH40
12 Holder
13 Rubber pad for DW676
14 Spacer

Assembly and adjustment

Also refer to your planer manual.
Preparing the planer stand (fig. A)
The planer stand can be used with the DW678(E)
without modifications.
• For the MFF81 and DW676, do not use the
spacer (14).
• For the DW676, also replace the rubber pad (11)
with the thicker pad (13).
• Mount the blade guard (1) using the screw (4),
washer (3) and wing nut (2).
E N G L I S H
en - 2