Package Contents; Battery Type - DeWalt XR LI-ION DCS391 Bedienungsanleitung

EngLIsh
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely depleted
of charge. The battery pack will need to be recharged before
use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the
environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCS391 operates on an 18V XR Li-Ion battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB546. Refer to
Technical Data for more information.
36
WALT batteries with a
e

Package Contents

The package contains:
1 Cordless circular saw
1 24-tooth blade
1 Hex key
1 Rip Guide
1 Plastic bag (QW, XJ, GB):
1 Dust extraction port
1 M4 X 18 Cap screw
2 Li-Ion battery packs (L2, M2 models)
1 Kitbox
1 Charger
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A, D, F)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch lock-off button
1
Trigger switch
2
Battery pack
3
Depth adjustment lever
4
Shoe
5
Lower blade guard retracting lever
6
Lower blade guard
7
Blade clamping screw
8
Kerf indicator
9
Bevel adjustment knob
10
Blade lock button
11
Auxiliary handle
12
Battery release button
13
Hex key
14