The Eco-Function - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

12. The Eco-function

The Eco-function allows you to save energy in breaks between sauna sessions.
When the Eco-function is activated, the connected appliances run with reduced
power. You can choose between a 20, 40 or 60-minute sauna break.
The sauna heater and the evaporator are switched on again before the end of
the break. In this way the preset temperature and preset humidity are reached
again at the end of the sauna break.
Perform the following steps to activate the Eco-function:
1. Select the temperature symbol 5 by pressing the mode button D.
2. Press the plus button B and the minus button C simultaneously for about
3 seconds.
► The Temperature symbol 5 and the humidity symbol 6 light up.
3. Set the desired duration of the break in minutes with the plus button B and
the minus button C.
● 20 stands for a 20-minute sauna break.
● 40 stands for a 40-minute sauna break.
● 60 stands for a 60-minute sauna break.
4. Then briefly press the On/Off button A.
► The display 1 shows the remaining break time.
► The Temperature symbol 5 and the humidity symbol 6 light up.
To cancel the ECO function, press the On/Off button A for about
3 seconds.
p. 64/70