Accessing User Programs; Creating Your Own User Programs - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

11.2. Accessing user programs

1. Select the user program symbol 4 by pressing the mode button D.
► The user program symbol lights up.
2. Select the desired user program (1 - 5) with the plus button B and the minus
button C.
3. Press the On/Off button A.
► The user program is started.
► The display 1 shows the started user program.

11.3. Creating your own user programs

You can create user programs as you would like. A preset user program is over-
written in the process. Perform the following steps:
1. Start all functions that are to be switched on with the user program with
the preferred intensity.
2. Select the user program symbol 4 by pressing the mode button D.
► The user program symbol lights up.
3. Use the plus button B and minus button C to select which number (1 - 5)
the new user program is to be saved under.
4. Press the plus button B and the minus button C for about 3 seconds.
► The saving of the user program is confirmed with a short flashing of the
user program symbol 4.
► The settings are stored in the selected user program.
Example
User Tempera-
program
2
Humidity
ture °C %
45 55
Light
Additional
output
0
p. 62/70
Fan
% %
50 0