Starting Sauna Mode; Switching Off Sauna Mode - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.5. Starting sauna mode

1. Select the temperature symbol 5 by pressing the mode button D.
Then briefly press the On/Off button A.
► The sauna heater switches on.
2. Set the desired temperature with the plus button B and the minus button C.
► The display 1 shows the desired temperature for a few seconds.
► Depending on the setting (see: "Temperature/humidity display (actual/
set value)" on page 37) the display 1 then shows the actual value
(standard setting) or the set value.

10.6. Switching off sauna mode

● Select the temperature symbol 5 by pressing the mode button D.
Then briefly press the On/Off button A.
► The sauna heater switches off.
► The display 1 shows "oFF"
p. 50/70