Switching On The Light; Switching Off The Light - Sentiotec Pro D Montage- Und Gebrauchsanweisungen

Instructions for use for the user

10.11. Switching on the light

When the dimmer switch function is activated
When the dimmer function for the light is activated, the power for the light can
be set to any level between level 0 to level 100. At 0, the light is switched off.
100 corresponds to full power.
1. Select the light symbol 8 by pressing the mode button D. Then briefly
press the On/Off button A.
► The light switches on.
► The display 1 shows the intensity.
2. Set the desired light intensity with the plus button B and the minus button C.
► The display 1 shows the set intensity.
If the light switch E is switched on, the sauna room light will operate at
full power. If you wish to dim the light, switch off the light switch E.
When the dimmer switch function is deactivated
When the dimmer function for the light has been deactivated, you can only switch
the light on and off. The light will always operate at full power.
1. Select the light symbol 8 by pressing the mode button D. Then briefly
press the On/Off button A.
► The light switches on.
► The display 1 shows "on".

10.12. Switching off the light

1. Select the light symbol 8 by pressing the mode button D. Then briefly
press the On/Off button A.
► The light switches off.
► The display 1 shows "oFF"
p. 55/70
EN