Interacoustics AC40 Gebrauchsanweisung Seite 1233

AC40 Instructions for Use - US
37 NB N
Channel 2
38 Talk Back
39 Right / Insert
Channel 1
40 Left / Insert
Channel 1
41 R Bone L
Channel 1
42 1 FF 2
Channel 1
43 Man / Rev
Channel 1
44 Single / Multi
Channel 1
45 Man / Rev
Channel 2
46 Sim / Alt
Channel 2
Choose between Narrow Band Noise and Broad Band Noise on
channel 2.
When active it allows the clinician to hear comments or responses
from the patient through the AC40 or monitor headset. Adjust the
gain by holding down the button for one second and turning one of
the rotary wheels (57)/(58) while holding the Talk Back button.
For selecting the right ear on channel 1 during testing. Insert
phones for the right ear can be activated by pressing twice (can
only be selected when calibrated). To route the signal binaurally in
Left and Right, use the shift button (18) and select the right ot left
button (39) (40).
For selecting the left ear on channel 1 during testing. Insert
phones for the left ear can be activated by pressing twice (can
only be selected when calibrated). To route the signal binaurally in
Left and Right, use the shift button (18) and select the right ot left
button (39) (40).
For bone conduction testing on channel 1 (can only be selected
when calibrated).
•
First push: selects the right ear for testing.
•
Second push: selects the left ear for testing.
Pressing "1 FF 2" will select free field speaker as output for
channel 1 (can only be selected when calibrated).
•
First push: Free Field speaker 1
•
Second push: Free Field speaker 2
Manual / Reverse tone presentation modes:
•
First push: Manual tone presentation on channel 1 each
time "Tone Switch" for channel 1 (59) is activated.
•
Second push: The reverse function - continuous tone
presentation on channel 1 which will be interrupted for as
long as the"Tone Switch" for channel 1 (59) is activated.
Pulsing modes:
•
First push: the tone presented on channel 1 will have a
pre-set length when "Tone Switch" for channel 1 (59) is
activated. The pulse lengths can be set up in the "Setup"
(18).
•
Second push: the tone on channel 1 will be pulsating
continuously for as long as the tone switch is
activated/pushed.
•
Third push: returns back to normal mode.
Manual / Reverse tone presentation modes:
•
First push: Manual tone presentation on channel 2 each
time "Tone Switch" for channel 2 (60) is activated.
•
Second push: The reverse function - continuous tone
presentation on channel 2 which will be interrupted each
time "Tone Switch" for channel 2 (60) is activated.
Allows toggling between Simultaneous and Alternate presentation.
Ch1 and Ch2 will present the stimuli simultaneously when Sim is
selected. When Alt is selected, the stimulus will alternate between
Ch1 and Ch2.
Page 17