TERMA VOLTAN Anleitung Zur Montage Und Verwendung Seite 12

• There can be only one temperature and humidity sensor (VTS) in one heating zone.
• The name of each device must be unique within the system.
• The name of the zone must be unique within the system.
SMART SYSTEM
BASIC INFORMATION ABOUT THE SYSTEM
AND THE APPLICATION
Heating Zones
In the application, a newly created ʻhouse' should be divided into heating zones
(e.g. rooms) to which individual devices are assigned. It is possible to select
a schedule and view telemetry data for each zone. The list of all zones is visible
to the user in the Zones tab. The view of a single zone contains a set of actions
and information available to the user.
The temperature presented in the center of the screen of a single zone is the
current measured temperature, while the value at the bottom is the set tem-
perature that depends on the mode in which the system is currently operating:
• if the Vacation mode is active, the Vacation mode temperature is displayed
• if the Smart Location is active, the temperature for the Smart Location is
displayed
• if at least one device is in the manual mode, the temperature set for the
manual mode is displayed — the
• otherwise, the temperature for a given time interval will be displayed accor-
ding to the schedule — icon
12
icon is displayed.
is displayed.