TERMA VOLTAN Anleitung Zur Montage Und Verwendung Seite 10

e. When the automatic part of the process is over, select the appropriate
zone in the application (or create a new one) and enter the device name
and other data.
OPERATING THE INTERFACE PANEL
White stripes
Red stripe
1. To wake up the device from the sleep mode, briefly press any button.
2. To raise or lower the temperature by one step, briefly press „+" or „−" button.
3. To start the INTENSIVE HEATING function, press and hold the „+" button
„−" a red stripe will appear on the interface. The radiator will heat at full po-
wer for 1 hour and then return to the previous settings
4. To swap the „+" and „−", buttons, press and hold (> 10 s) the „+" button.
5. Modes and special actions — press and hold both „+" / „−" buttons
simultaneously:
10
LED strips
control keys
5 stripes
4 stripes
3 stripes
2 stripes
1 stripe
INTENSIVE HEATING function is on
Red stripe
26°C
24°C
21°C
18°C
15°C