Maintenance; Status; Current Settings - axing MIP 8-00 Betriebsanleitung

5. Maintenance

In the menu item MAINTENANCE, status information of the head-end can be viewed and the technical conditions can be
configured.
5.1.

STATUS

5.1.1.

Current Settings

Under Current Settings, you will find the following information:
•
Firmware version: Displays the firmware version
•
Software version: Displays the version of the interface
•
Serial number of the device
•
Device name entered under SYSTEM
•
Processor temperature
•
Ventilation temperature
•
Output voltage and temperature of the power supplies
 You can additionally switch off the alarm tone (Power buzzer) of the power supply monitoring.
Important: If you stay on the maintenance page for more than 2.5 minutes, an automatic logout will occur and you will have
to repeat the login procedure.
2022-02-03 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIP-8-16-0x.pdf Page 31 of 48