Mpts; Output Mode - axing MIP 8-00 Betriebsanleitung

4.3.2.

MPTS

If MPTS (Multi Program Transport Stream) is selected as the transport stream output (see 5.2.1 on page 33), then each of the
8/16 output MPTS is individually configured.

Output mode

Choose between the following options:
•
•
•
Output Rate
Choose between the following options:
•
•
•
Manual Rate Constant bitrate input when CBR (manual) is selected.
Source port
Port of the source
Destination IP IP address that must be entered as a multicast IP address for the set-top boxes or
IPTV terminals.
Destination Port Port number of the destination
2022-02-03 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIP-8-16-0x.pdf
Disabled = no output transport stream
UDP = User Datagram Protocol
RTP = Real-Time Transport Protocol
VBR = compression method for variable bit rate audio and video data
CBR (auto) = compression method for constant bit rate audio and video data.
The bitrate is assigned automatically.
CBR (manual) = The bit rate is assigned manually.
Page 29 of 48