Pid Filtering (With Mks 1-01); Edit Service Id - axing MIP 8-00 Betriebsanleitung

4.2.10. PID Filtering (with MKS 1-01)

The transport streams consist of packets that are identified by PIDs (Packet Identifier). With the fee-based software extension
MKS 1-01, individual packages can be filtered out of the transport stream.
 Click on one of the programs.
The table with the packages contained in the program is opened.
 For the PIDs that you want to filter out of the transport stream, place a checkmark in the BLOCK column (1).
The package is no longer transferred in the transport stream. The OUT PID column is empty for these PIDs (2).

4.2.11. Edit Service ID

You can edit the Service ID.
Not provided modifications will cause problems!
Changes of the SID are only necessary for STBs using fix preset IDs. These STBs are used of some providers to suppress
reception for external devices. Modifications should only be done after consulting the provider.
 Enter the Service ID with the keyboard or increase / decrease the ID with the arrow buttons right of the number.
 Click on the green check mark to accept the ID or on the red cross to discard the entry.
2022-02-03 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIP-8-16-0x.pdf Page 27 of 48