Select All Programs; Lcn (Logical Channel Numbering); Changing Program Name - axing MIP 8-00 Betriebsanleitung

Operation instructions | MIP 8-00 | MIP 16-00 | MIP 8-06 | MIP 16-06
4.2.7.

Select all programs

 Activate the option Select all incoming programs, with each program of the tuner the button is activated.
4.2.8.

LCN (Logical Channel Numbering)

The LCN function enables channel allocation for the station scan of the TV devices. The TV device must support the LCN
function. An LCN can only be entered for programs assigned to an SPTS or MPTS.
 Click on the LCN column for the corresponding program.
 Enter the LCN with the keyboard or increase / decrease the LCN with the arrow buttons right of the number.
 Enter a separate LCN for each desired program.
 To clear the LCN, enter 0 in the LCN column.
 Click SAVE CHANGES.
The numbers of the channels are saved.
4.2.9.

Changing Program Name

The name of a program can be changed. The entered program name will later appear in the channel list of the connected TV
sets.
 Click on one of the programs.
The table with the Information opens.
 Click right of the field Program Name.
 Enter an individual program name and click on the green check mark.
This first completes the entry.
 After you have changed the desired program name(s), click SAVE CHANGES.
The entered program name(s) are stored in the headend.
Page 26 of 48 BA_MIP-8-16-0x.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-02-03