Initialization Phase 2; Spts - axing MIP 8-00 Betriebsanleitung

Operation instructions | MIP 8-00 | MIP 16-00 | MIP 8-06 | MIP 16-06
4.2.

Initialization phase 2

In the initialization PHASE 2, the found programmes are subdivided by tuner.
Depending on which transport stream output has been selected (SPTS or MPTS, see 5.2.1 on page 33), the programs are
selected in phase 2.
4.2.1.

SPTS

If SPTS (Single Program Transport Stream) is selected as the transport stream output (see 5.2.1 on page 33), programs can be
activated or deactivated in the Select column.
 With each programme you asign to an output, the data rate rises.
 The performed modifications are only taken over by the system when you click on SAVE CHANGES.
Page 18 of 48 BA_MIP-8-16-0x.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-02-03