♦
Insert the 2-in-1 suction nozzle
the appliance . Make sure that the button for adjusting the brush
nozzle is facing upwards (see Fig . 2) .
Fig. 2
♦
To adjust the 2-in-1 suction nozzle
the brush nozzle . Slide the brush nozzle forward if you want to
use the brush nozzle . Slide the brush nozzle backward if you
want to use the crevice tool (see Fig . 3) .
Fig. 3
♦
To remove the 2-in-1 suction nozzle
opening
2
■
14
│
GB │ IE │ NI │ CY
(see Fig . 2) .
into the suction opening
w
, hold down the button on
w
, pull it out of the suction
w
of
2
SHD 7.4 A1