Restore Factory Default; Maintenance - Raddy WF-100C LITE Benutzerhandbuch

Note: In this upgrade process only update the Wifi. The console does not reset.
Once the upgrade is completed, the console will automatically exit WAP mode.

14. Restore Factory Default

To reset the console to factory default (WiFi network ,Weather server and display),
press and hold the MAX/MIN/- key for 3 seconds while the console is only battery-
powered. The display console must not be supplied with voltage via the plug-in
power supply during this process.

15. Maintenance

1) Clean the rain gauge of Integrated Outdoor Sensor every 3 months.
 Unscrew the rain collector funnel by turning it 30°counter clockwise.
 Gently remove the rain collector funnel.
 Clean and remove any debris or insects.
 Install the collector funnel after it has been cleaned and completely dried.
A: Remove the rain collector funnel
45