For Southern Hemispheres (Sou) Reference - Raddy WF-100C LITE Benutzerhandbuch

The cardinal directions (N, S, E, W) molded on the body of the outdoor sensor are
indicators for the Northern Hemisphere only.
Step 1: There is a "S" indicator on the wind vane that indicates South, check the
directions with the compass and align this "S" marker in the direction of South.
Step 2: Console operation is set to Northern Hemispheres ( NOR in the time area) in
Location division. (Check the detail step of setting the time area in the part 17 of
chapter 7.2)

5.1.2 For Southern Hemispheres (SOU) Reference.

For Southern Hemisphere installations, ignore the direction (N, S, E, W) and face
the solar panel to the North (and in a sunny position) when it comes to install the
Integrated Outdoor Sensor.
Step 1: Install the Integrated Outdoor Sensor and face the solar panel to the North.
Step 2: Console operation is set to Southern Hemispheres ( SOU in the time area) in
Location division. (Check the detail step of setting the time area in the part 17 of
chapter 7.2)
Note: The location division (NOR or SOU) on Display Console and the directions
of the sensor have to be adjusted to match with your real location.
If the wind direction sensor is not positioned correctly during installation, permanent
wind direction error will be introduced.
12