Final Installation Of Sensors; Installation Of Integrated Outdoor Sensor; For Northern Hemispheres (Nor) Reference - Raddy WF-100C LITE Benutzerhandbuch

3. Line of Sight Rating. This device is rated at 300ft （ (91.4m) line of sight (no
interference, barriers or walls) but typically you will get 100ft maximum under most
real-world installations, which include passing through barriers or walls.
4. Metal Barriers. Radio frequency will not pass through metal barriers such as
aluminum siding. If you have metal siding, align the remote and console through a
window to get a clear line of sight.
The following is a table of reception loss vs. the transmission medium. Each "wall"or
obstruction decreases the transmission range by the factor shown below.
Material
Glass (untreated)
Plastics
Wood
Brick
Concrete
Metal

5. Final Installation of Sensors

5.1 Installation of Integrated Outdoor Sensor

WF-100C Lite can be used in both the Northern and Southern Hemispheres.
installation, you will need to calibrate the wind direction.
*There are four alphabet letter of "N","E","S"and "W" around the wind direction, ("N"
is North, "E" is East, "S" is South, "W" is West.)

5.1.1 For Northern Hemispheres (NOR) Reference.

RF Signal Strength Reduction
5-15%
10-15%
10-40%
10-40%
40-80%
90-100%
11
Prior to