Sensor Search Mode; Max/Min Record Viewing And Reset - Raddy WF-100C LITE Benutzerhandbuch

MAX/MIN/- key to toggle the wind speed units between m/s, km/h, mph, knots or
bft.
11. Rainfall Units of Measure (default: mm). Press the SET key again to change
the Rainfall units of measure. Press CHANNEL/+ key or MAX/MIN/- key to
toggle the rainfall units between mm and inch.
12. Barometric Pressure Display Units(default: hPa). Press the SET key again to
change the pressure units of measure. Press the CHANNEL/+ key or MAX/MIN/-
key to toggle the pressure units between mmhg, inHg or hPa.
13. Pressure Threshold Setting (default level 2). Press the SET key again to
change the pressure threshold. Press the CHANNEL/+ key or MAX/MIN/- key to
change pressure threshold 2 mbar/hour to 4 mbar/hour.(For detailed info of this
part please refer to 9.5)
14. Weather Icons Setting (default: partly cloudy). Press the SET key again to
change the initial weather icon. Press the CHANNEL/+ key or MAX/MIN/- key to
select the initial weather icon of Sunny, Cloudy, Partly Cloudy or Rainy. (For
detailed info of this part please refer to 9.1 and 9.2)
15. Location division.(default: Northern Hemisphere).Press the SET key again to
change the location division. Press the CHANNEL/+ key or MAX/MIN/- key to
toggle the
Hemisphere(SOU). (refer to 5.0 Final Installation of Integrated Outdoor
Sensor)

7.3 Sensor Search Mode

If a sensor loses communication, dashes (--.-) will be displayed. If a specific channel
is lost, press the CHANNEL/+ button to display that channel prior to entering the
search mode.
To reconnect the display console, press and hold the CHANNEL/+ button for 3
seconds to enter the sensor search mode.

7.4 Max/Min Record Viewing and Reset

7.4.1 MAX Record Viewing and Reset
In normal mode, press (do not hold) the MAX/MIN/- key, the MAX icon will be
displayed in date area.
Press the SET key to view max values of rainfall (1h, 24h, week or month), wind gust
and average (m/s, bft, knots,mph or km/h), pressure (ABS or REL), outdoor
temperature and humidity (temperature, dew point or feels like) and indoor
temperature and humidity.
Press the MAX/MIN/- key for three seconds to clear all Max values.(Rainfall, wind
gust and average, pressure, temperature and humidity maximum values).
Press the SNOOZE/LIGHT key to exit the min/max checking and clearing mode,
return to normal display mode.
Note: The Maximum values will display the current values after reset.
sunlight units Northern Hemisphere
16
(NOR)or Southern