Set (Program) Mode - Raddy WF-100C LITE Benutzerhandbuch

To clear the total rain, press the CHANNEL/+ or MAX/MIN/- button until total rain is
displayed. The total rain will flash. Press and hold the SET button for five seconds
until total rain reads 0.0.
3. Absolute Pressure and Relative Pressure. Press the CHANNEL/+ or
MAX/MIN/- key to toggle between absolute pressure and relative pressure.
4. Outdoor Temperature. Press the CHANNEL/+ or MIN/MAX/- key to toggle
between temperature, dew point and feels like.

7.2 Set (Program) Mode

While in Normal Mode, press and hold the SETkey for at least three seconds to
enter the Set Mode. The first setting will begin flashing. You can press the SET key
again to skip any step, as defined below.
Note: In the Set mode, press the CHANNEL/+ key or MAX/MIN/- key to change
or scroll the value. Hold the CHANNEL/+ key or MAX/MIN/- key for three seconds to
increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE/LIGHT button of the
display console.
1. 12/24 Hour Format (default: 12h):.Press the SET key again to adjust the 12/24
hour format setting (FMT). Press the CHANNEL/+ key or MAX/MIN/- key to
change between 12 hour and 24 hour format.
2. Change Hour. press the SET key again to set the hour. Press the CHANNEL/+
key or MAX/MIN/- key to adjust the hour up or down. Note the PM icon is present
during afternoon hours.
3. Change Minute. Press the SET key again to set the minute. Press the
CHANNEL/+ key or MAX/MIN/- key to adjust the minute up or down.
4. Date Format (default: D-M): Press the SET key again to enter the day/month
format mode. Press the CHANNEL/+ key to switch between M-D, D-M.
5. Change Month. Press the SET key again to set the calendar month. Press the
CHANNEL/+ key or MAX/MIN/- key to adjust the calendar month.
6. Change Day. Press the SET key again to set the calendar day. Press the
CHANNEL/+ key or MAX/MIN/- key to adjust the calendar day.
7. Change Year. Press the SET key again to set the calendar year. Press the
CHANNEL/+ key or MAX/MIN/- key to adjust the calendar year.
8. Max/Min Clearing (default: ON). Press the SET key again to set the max/min
clearing mode (CLR).
midnight) or manually. Press the CHANNEL/+ key or [Temperature Units of
Measure (default: °F-] key to switch between "Clears 24h" and Clears Manually.)
9. Press the SET key again to change the temperature units of measure. Press the
CHANNEL/+ key or MAX/MIN/- key to switch between °F and °C units of
measure.
10. Wind Speed Units of Measure (default: m/s). Press the SET key again to
change the wind speed units of measure . Press the CHANNEL/+ key or
The Max/Min can be programmed to clear daily (at
15