Raddy WF-100C LITE Benutzerhandbuch Seite 30

7) Click Get coordinates to identify your location of on the map. The cross in the
middle of the pop up should now mark at the location of your weather station. Use
the buttons marked "+" and "-" to zoom in or out on the map displayed. You can
move the cross on the map by holding down the mouse button. then click "Done" to
confirm.
8) Complete the information input, then slide down to the bottom and click "Create".
9) The device is successfully added to Weathercloud as screenshot below. Please
click "Link" through the "Settings" to record the Weathercloud ID and Key information
for linking your WF-100C Lite via Wi-Fi later. (Refer to 10.3)
29