Alarm And Key Beeper On/Off; Other Features Of Display Console; Weather Forecasting; Weather Icons - Raddy WF-100C LITE Benutzerhandbuch

Note: To prevent repetitive temperature alarming, there is a 0.5 °F tolerance
band. For example, if you set the high alarm to 26.7 °F and silence the alarm, the
alarm icon will continue to flash until the temperature falls below 26.2°F, at which
point, the alarm will reset and must increase above 26.7 °F to activate again.
Note: To prevent repetitive alarming of humidity, there is a 4% tolerance band in
humidity alarm. For example, if you set the high alarm to 60% and silence the alarm,
the alarm icon will continue to flash until the humidity falls below 56%, at which point,
the alarm will reset and must increase above 60% to activate again.

8.4 Alarm and Key Beeper ON/OFF

Randomly click the any button to silence the alarm sound.
In normal mode, press and hold the ALARM key for three seconds to toggle the
beeper on or off (depending on the current setting).
The BZ ON (beeper on) or BZ OFF (beeper off) icon will appear in the time area for
three seconds. press and hold the ALARM key again for three seconds to toggle the
BZ ON or BZ OFF command.

9. Other Features of Display Console

9.1 Weather Forecasting

Note: The weather forecast or pressure tendency is based on the rate of change
of barometric pressure. In general, when the pressure increases, the weather
improves (sunny to partly cloudy) and when the pressure decreases, the weather
degrades (cloudy to rain).
The weather forecast is an estimation or generalization of weather changes in the
next 24 to 48 hours, and varies from location to location. The tendency is simply a
tool for projecting weather conditions and is never to be relied upon as an accurate
method to predict the weather.

9.2 Weather Icons

Condition
Sunny
Icon
19
Description
Pressure is rising and
the previous condition is
partly cloudy.