Connection To The Evaluation Unit - Balluff BTL7-P511-M Serie Betriebsanleitung

BTL7-P511-M _ _ _ _ -T _ 2/3-S32/KA _ _ /FA _ _
Magnetostrictive Linear Position Sensor – Rod Style
7
Technical data (continued)
7.6

Connection to the evaluation unit

The maximum sampling frequency f
current value is available with each sampling, can be found
in the following graphic:
f in Hz
A,max
Fig. 7-1: Maximum sampling rate depending on the nominal length.
www.balluff.com
, at which a new
A,max
The minimum sampling rate f
A,min
Nominal length in mm
is 62.5 Hz.
(1) 1 magnet
(2) = 2...16 magnets
english 17