Special Conditions For Safe Use (X Conditions) - WIKA 232.50.100 Betriebsanleitung

2. Safety
The instrument bearing this mark is a safety pressure gauge
with a solid baffle wall in accordance with EN 837.
2.6 Special conditions for safe use (X conditions)
1. All accessories (e.g. valves or attachment components) must be
assessed in combination with the delivered instruments by the end
user.
2. The operator must recognise ignition hazards and take suitable
protective measures. See chapter 2.2 "Responsibility of the operator".
3. The legibility of the marking must be observed during time in use but
at least during inspection periods of three years. See chapter 2.2
"Responsibility of the operator".
4. For instruments with marking pointer, ensure that there are no electro-
static charging mechanisms at the marking pointer.
5. Avoid any kind of external impact. External impacts can generate
sparks through friction processes between different materials.
6. The filling/refilling of instruments by non-authorised personnel leads
to a loss of the explosion protection and can lead to damage to the
instrument.
WIKA operating instructions pressure gauge, model 2 per ATEX
Before mounting and commissioning the instru-
ment, ensure you read the operating instructions!
EN
17